水口回收機邊機

Sucker Recycling Machine Edge Machine Details Water Recycling Machine Edge Machine is suitable for crushing and recycling with machine edge outlet material, easy operation, excellent quality, European style, small size, slow mute, uniform particles, little dust, long tool life , Mainly used to place in the plastic molding machine next to the robot with the nozzle material will be crushed into granular, and then by the immediate recovery device will be sent back to the plastic molding a few re-use.
The scope of application is widely used in: plastic factory, electronics factory, plastic container factory, lighting factory, shoe factory, electrical plant, auto parts factory, luggage factory, pumping tablets plant, waste recycling plant, plastic furniture factory, plastic Toy factory, plastic kitchen utensils factory. Suitable for crushing recovery PC, nylon, ABC and other hard outlet material.

Not to cause pollution of the crushed material, coarse knife knife knife can be uncovered, easy to clean. Feed hopper with anti-vibration stainless steel plate production, reducing noise,
The total opening of the machine is not required to be refueled for easy maintenance. The fine pulverizer of the grinder is designed with a circular arc, and the teeth are not easily broken. The spiral discharge device at both ends of the spindle has the function of preventing the powder from entering the bearing
Features: The use of a unique open body structure, when you open the crushing chamber, there is no dead ends, easy to clean, coarse crushing knife using a new type of shear knife, and low speed , Thus reducing the production of powder, injection side of the machine body surface using electrolytic nickel, not only to enhance the hardness of the crushing chamber, but also play a role in rust, and will not fall off, the water recovery machine side machine technical parameters table

Due to low speed, so the use of low noise, less powder. It is suitable for the crushing and recycling of the machine, and the operation is convenient, the quality is excellent, the Europeanized shape, small volume, slow mute, the particles are even, the dust is very small, the tool life is long, mainly used in the plastic molding Machine with the robot with the nozzle material will be crushed into granular, and then by the immediate recovery device will be sent back to the plastic molding a few re-use.
Silence machine-side slow-speed grinder 30 seconds immediately recovered, so that the water is not due to wetting (absorption of water vapor) pollution, resulting in plastic products, one by one strength injection edge feeder; stress, color damage, it can be improved Forming the quality of the product, because the speed is low, so the use of low noise, less powder.