顆粒自動集中供料系統

顆粒自動集中供料系統且得到的顆粒分布均勻 

The particles are automatically concentrated in the feed system and the resulting particles are evenly distributed

注塑機顆粒自動集中供料系統技術是系統化技術應用于物料除濕、干燥、輸送的一種方法，物料于系統室中將液體物料經霧化后，注塑機顆粒自動集中供料系統在與熱空氣的接觸中，

Injection molding machine automatic feeding system is a systematic technology used in the material dehumidification, drying,

水分迅速汽化，即得到輸送產品，該法能直接使溶液、乳濁液除濕、干燥、成粉狀或顆粒狀制品，

Transport of a method, the material in the system room will be liquid material after atomization, the injection molding machine particles automatically centralized feeding system in contact with hot air,

可省去蒸發、粉碎等工序，且得到的顆粒分布均勻。隨著注塑機自動集中供料系統行業的不斷發展，

Water vaporization quickly, that is, to transport products, the method can directly make the solution, the emulsion dehumidification, dry, into a powder or granular products,

注塑機顆粒自動集中供料系統的應用也越來越廣泛，

Injection molding machine particle automatic feeding system is also more and more widely used,

可是在關鍵技術方面還有待提高（比如對含糖量很高的物料的除濕、干燥、輸送），

But in the key technology has yet to be improved (such as high sugar content of the material dehumidification, drying, transportation),

另外在熱能的重復利用方面還要下大的功夫，還需要同行的共同研究和**，使注塑機顆粒自動集中供料系統行業能夠快速的發展。  

In addition, the re-use of heat in the next big effort, but also the need for peer joint research and innovation, so that the injection molding machine particles automatically focus on the feed system industry can quickly develop.

顆粒自動集中供料系統案例Particle automatic centralized feeding system case